Multi Image Playback; Jumping In Single Image Playback - Canon Powershot Pro70 Hardware Manual

Multi Image Playback

You can display sets of nine recorded images
on the LCD monitor.
1. Set the mode dial to play.
The last recorded image will
display on the LCD monitor.
2. Press the multi button.
The LCD monitor will switch to multi
image display and show up to nine images.
The last image to be displayed in single
image playback mode will have a green
selection frame around it. This image is
referred to as the "selected image."
70
3. Move the selection frame within the
MULTI
QUALITY
4. Press the multi button again to return
display by pressing the + or - button.
the display to single image playback.
The last selected image will appear in
the LCD monitor.
• When you wish to change the displayed
images in sets of nine images, use the
jump mode (p. 71).
Selected Image
+
-