CDI-E100-010
XXXXXXXX
The following manuals are supplied with your camera. Please refer to them
as need be.
Reference Guides
Contents of This Guide
Included accessories and separately
sold equipment information
System Map
1.
Install the battery pack and
the CF card.
2.
Quick Start
Shoot images with the camera.
3.
Play back the images.
Camera User Guide
4.
Erase any unwanted images.
Learn the names of camera
components.
5.
Direct Print User Guide
Print the images.
6.
Install the software.
Printer User
Connect the camera to a
computer.
Software Starter Guide
7.
Download the images to a
computer.
These PDF format manuals are
What you can do with the
available on the Canon
software
website. Please download
them from the following URL:
The various ways of using the
http://web.canon.jp/Imaging/
software
information-e.html
3
Playing back the Images
A.
Turn the mode lever to
(Playback)
while pressing the release button.
Mode Lever
Release Button
© 2004 CANON INC.
1
Preparing the Camera
A.
Charge the battery pack.
Place the battery pack in the battery charger and plug the charger into
a power outlet or attach the power cord to the battery charger and
plug the other end into a power outlet.
The charge indicator lights red while charging and changes to green
This
when the battery pack is charged. Charging the battery pack takes
approximately 90 minutes.
Guide
Guide
• Battery charger model names and types vary by region.
B.
Slide the CF card/battery cover
open.
Supplied with
a printer
Guide
C.
Insert the CF card and
• ZoomBrowser EX
the battery pack.
Software User Guide
• ImageBrowser
Software User Guide
➜
Camera User Guide
B.
Play back the images.
Use the B or A arrow on the omni selector to display
the image you wish to see.
PRINTED IN JAPAN
➜
Camera User Guide
Charge
Indicator
D.
Slide the CF card/
battery cover closed.
4
Erase an Image
A.
Use the B or A arrow on the
omni selector to select the
image you wish to erase (
and press the
A Button
B Button
2
➜
Shooting
Camera User Guide
A.
Turn the mode lever to
(Shooting) while
pressing the release
button.
Mode Lever
Release Button
C.
Open the LCD monitor.
D.
Set the date and time. (first time the camera is powered on)
Use the B or A arrow on the omni selector to select the items you
wish to set, and use the C or D arrow on the omni selector to
change the value.
Check that the date and time shown are correct, then press the SET
button.
E.
Aim the camera at the subject and adjust the zoom ring to
achieve the desired composition. (See "Zoom" in the "Quick
Reference.")
F.
Focus and shoot.
Press the shutter button
halfway to focus
(The camera
.
focuses and two beeps sound.)
➜
Camera User Guide
B.
When the confirmation screen appears, check
that [Erase] is selected and press the SET button.
)
Select [Cancel] using the B or A arrow on the omni selector to
button (
).
cancel without erasing.
B.
Turn the mode dial to
.
Mode Dial
Press the shutter button all
the way to shoot.