Adjusting The Zoom - Canon Powershot Pro70 Hardware Manual

Adjusting the Zoom

Use the zoom lever to adjust the zoom setting.
1. Set the mode dial to auto or program.
2. Adjust the zoom setting by pushing the
zoom lever up or down.
Zoom Lever
Wide Angle 28 mm
(35 mm film equivalent):
to encompass a wider scope
Telephoto 70 mm
(35 mm film equivalent):
to make subjects appear closer
• There is no response when the zoom
lever is pushed while the focus lock is
active.
52
Shooting in Macro Mode
Shoot close-ups in macro mode, which can
focus on an object as close as 12 cm to the
lens tip. Macro mode can be used with the
camera set to either auto or program.
1. Open the LCD monitor and set the
mode dial to auto or program.
2. Press the macro button ( ). The macro
icon will appear in the display panel.
The lens will automatically set itself to the
maximum telephoto (70 mm) setting.
Although the zoom lever will operate at
this point, the macro mode is only effective
Macro
icon