List Of Message Codes - Canon Powershot Pro70 Hardware Manual

List of Message Codes - A
The following codes may appear in the display panel.
Pb
PC
Exx
(xx = number)
Steady
Flashing
Flashing
1 2
or Flashing
1 2
110
Image playback
Camera connected to a computer in PC mode
Camera malfunction. Set mode dial to lock, then reset it to auto, program or play
and retry shot or replay. Problem exists if error code reappears. Note the number
and contact Canon Customer Support Help Desk. If an error code displays directly
after taking a picture, the shot may not have recorded. Check image in play mode.
Full charge in battery pack.
Battery Pack NB-4H or 2CR5 lithium battery charge is low. Recharge battery
pack soon or replace battery.
Battery Pack NB-4H or 2CR5 lithium battery charge is spent, or the battery
cover is open. Close the battery cover properly, install a charged battery pack
or new battery, or connect to an AC power source.
Button battery charge low and date/time setting lost. Replace battery and
reset date/time.
Recording sound annotation.
Writing sound file to CF card, or recording error has occurred because CF card
is full or data is corrupted.
No CF card installed, or CF card slot cover is open.
CF card has experienced an anomaly or is full.