Shooting With The Self-Timer - Canon Powershot Pro70 Hardware Manual

Shooting with the Self-Timer

In self-timer mode, press the shutter button all
the way and the camera will automatically
shoot 10 seconds later. The self-timer can be
used in either auto or program mode.
1. Set the mode dial to auto or program.
2. Press the drive button. The self-timer
icon ( ) will appear in the display panel.
• Auto Mode
• Program Mode
3. Press the shutter button halfway, wait
for the double beep and then press the
shutter button all the way.
The self-timer will activate, 10 seconds
later a single beep will sound and the shot
will be taken. The self-timer lamp on the
front of the camera will flash while the
JUMP
self-timer is working. The flashing will
DRIVE
speed up two seconds before the shutter
activates.
To cancel the self-timer after it has been
activated, set the mode dial to a new
position.
61