Attach Housing To The Interface Box - Bosch VG4-161-CC0 Installation Manual

VG4 Modular Camera Series
The following table summarizes the pin connectors and their function:
No.
P103 Alarms In
P102 Alarms Out
P104 Analog Relay
P105 Data In/Out
P101 24 VAC
J102
J101
Table 4.1 Interface Box Wire Terminals
WARNING!
24 VAC Class 2 power supply only.
4.7

Attach Housing to the Interface Box

The In-Ceiling Housing is attached to the Interface Box and secured by two (2) thumbscrews.
1.
2.
Bosch Security Systems, Inc.
Connector Pin 1
Alarm 3
Alarm 1
Relay
N.O.
C-
(BiPhase)
Line
Video BNC Connector Input
UTP/Ethernet Connector Input
Figure 4.9 Attach Housing to Interface Box
Insert the In-ceiling housing through the hole in the ceiling to verify that the edge of the
hole support the unit. Then remove the housing from the hole.
Align the ball studs of the In-Ceiling Housing to the Stud Retainers on Interface Box and
attach.
Installation Manual
Pin 2 Pin 3 Pin 4
Alarm 4 Alarm 5 Alarm 6
Alarm 2 Alarm 3 GND
Relay Relay Earth
COM N.C.
C+ Earth RXD (+)
(BiPhase) Ground (RS-232/485)
Earth Neutral
Installing the In-Ceiling Mount | en
Pin 5 Pin 6
Alarm 7 AGND
Alarm 1 Alarm 2 Groun
TXD (-) Signal
(RS-232/485) Ground
F.01U.216.010 | 8.0 | 2011.02
83
Pin 7
d