78
en | Installing the In-Ceiling Mount
4.2
Pre-installation Check List
1.
2.
WARNING!
24 VAC Class 2 power supply only.
3.
4.
4.3
Dimensions
mm
inches
Figure 4.1 In-ceiling Dimensional Outline
F.01U.216.010 | 8.0 | 2011.02
Determine the location and distance for the power supply box based on its voltage and
current consumption. See Section 5 Cable and Wire Standards, page 88 for specifications.
Install all rough wiring including: power, control, video, alarms I/O, relay I/O, and fiber
optic cabling.
A minimum of 216-mm (8 1/2-inch) of air space above the ceiling is required to install the
In-ceiling Mount.
If this AutoDome installation utilizes the AutoTracker feature, refer to
Section A Installation Notes for AutoTracker, page 102, before mounting the AutoDome.
176.8
DIA.
6.96
204.3
8.04
Installation Manual
210.7
8.30
19.0
0.75
153.9
6.06
VG4 Modular Camera Series
150.2
5.91
94.0
3.70
Bosch Security Systems, Inc.