Bosch VG4-161-CC0 Installation Manual page 61

Vg4 modular camera series
Table of Contents

Advertisement

VG4 Modular Camera Series
2.
3.
CAUTION!
To protect the AutoDome from damage due to cold temperatures, ensure that you connect the
24 VAC heater power wires to the P101 connector.
4.
5.
Bosch Security Systems, Inc.
Attach the control data in/out wires to their respective terminals on the P105 connector
on the Pipe Interface Board. See Figure 3.10, Page 59, for an illustration of these
connections.
Connect the 24 VAC power wires to the P101 connector on the Pipe Interface Board. If
this model has a heater, connect the 24 VAC heater power wires to connector P107.
To connect alarm inputs and outputs, attach the supplied 6-pin Alarms In and the 4-pin
Alarms Out connector plugs with flying leads to the appropriate alarm wires. Then
connect the plugs to their mating connectors P103 and P102 on the Pipe Interface Board.
PIN
1
2
3
4
PIN
1
2
3
4
5
6
Figure 3.11 Alarm and Relay Connector Plugs
1
4-pin Alarm
2
Connector (P102)
Pin Description
Pin Description
1
Alarm Out 1
1
2
Alarm Out 2
2
3
Alarm Out 3‡
3
4
Alarm Ground
4
5
6
The Alarm Out 3 (on the P102 connector) is the dedicated low pressure alarm for VG4 100
Series AutoDome cameras.
To connect supervised alarms and relays, attach the appropriate wires to their terminals
on the P104 connector on the Pipe Interface Board (see Figure 3.11, above). In addition,
see Section 6 Alarms and Relay Connections, page 98 for more details on wiring alarms and
relays.
Note: There is a slot located at the top of the Interface Board to tie the wires to the
circuit board with a cable tie.
Installation Manual
Installing Roof Parapet and Pipe Mounts | en
WHITE
BROWN
P102
ORANGE
GREEN
WHITE
BROWN
ORANGE
P103
GREEN
YELLOW
BLUE
6-pin Alarm In
3
Connector (P103)
Pin Description
Alarm In 3
1
Alarm In 4
2
Alarm In 5
3
Alarm In 6
4
Alarm In 7
5
Alarm Ground
6
7
1
2
3
4
5
6
7
P104
7-pin Relay Connector
(P104)
Alarm Out 4 Normally Open
Alarm Out 4 COM
Alarm Out 4 Normally Closed
Earth Ground
Analog Alarm 1
Analog Alarm 2
Ground
F.01U.216.010 | 8.0 | 2011.02
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents