American Megatrends MegaRAC G2 User Manual page 47

Section Icons and Functions,
Section Icon
Configuration
Advanced
Continued
Name Description
Administrators This page allows you to configure the administrators who
have access to the MegaRAC G2 card.
Networking This page describes the network parameters for the
MegaRAC G2 card.
Date/Time This page displays the MegaRAC G2 card's date and time.
You may also set the card's date and time by entering
appropriate values in the Set boxes and pressing Sync. For
your convenience, this system's current date and time show
up by default in the Set boxes.
Maintenance This page allows you to update your MegaRAC G2 card's
firmware using an upgrade wizard.
SMTP The MegaRAC G2 card uses SMTP to send out E-mail alerts
and SNMP Traps. This page configures the SMTP
parameters. The MegaRAC G2 card tries the second mail
server if it cannot contact the first mail server. Some SMTP
servers also require a valid From Address to send out mails.
You can use the From address fields to specify a valid
address that your mail server will accept.
Alerts This page allows you to configure alert recipients. You can
also set the conditions necessary for the alert recipients to
receive alerts.
Event Log Policy This page allows you to set what happens when the event
logs are full. You can either set up the MegaRAC G2 card to
stop logging events or roll over the log files.
I2C This page allows you to perform advanced I2C
configurations.
IPMI This page allows you to configure how the MegaRAC G2
card uses IPMI.
Modem This page describes the modem configuration parameters for
Configuration the MegaRAC G2 card. (not designed to support Console
Redirection)
Host Heartbeat This page allows you to configure the Host Heartbeat's time
interval. The MegaRAC G2 card expects a heartbeat from the
host system after every configured elapsed time interval to
determine if the host system's operating system is
functioning.
Chapter Four : Using Your MegaRAC G2 Card 37