American Megatrends MegaRAC G2 User Manual page 116

Advanced MegaRAC G2 Card Configurations,
Modem Configuration, Continued
Note: The optional modem is NOT designed for Console Redirection. However, you can still
perform Console Redirection, but it is debilitating and extremely slow.
The following table describes the information listed in this subsection in detail:
Item
Serial Port
Speed
Modem Init String
Phone Number
PPP Server
configuration
Server IP Address
Client IP Address
Save Button
106 MegaRAC G2 User's Guide
Continued
Description
This field displays the serial port the modem is on. This value is hard
coded and you cannot change it.
This dropdown menu allows you to set the speed of the modem.
This field allows you to enter a modem Init string that you want the
MegaRAC G2 card's modem to use.
This field allows you to enter a phone number that you want the
MegaRAC G2 card's modem to use when it sends an alert through
PPP (Mail via PPP or SNMP via PPP).
This section is used to configure the MegaRAC G2's behavior when
you connect to the MegaRAC G2 by dialing to its modem.
This is the IP that the MegaRAC G2 uses during a PPP connection.
This is the IP that the client system uses during a PPP connection.
This button allows you to save your configuration.
Cont'd