American Megatrends MegaRAC G2 User Manual page 32
American megatrends megarac g2 battery backup unit: user guide
Hide thumbs
Also See for MegaRAC G2:
- Datasheet (2 pages) ,
- Install manual (2 pages) ,
- Features (4 pages)
Table of Contents
Advertisement
Step 10 Connect to the MegaRAC G2 from a Client System,
Step
Description
7
In this example, the MegaRAC G2 card's IP address is 192.168.0.14. Double left click on the IP address
to start managing the MegaRAC G2 card and write down its IP address. Left click on the Finish button
after G2Seek discovers all MegaRAC G2 cards.
8
When prompted for the user name and password, enter the following:
Left click the OK button. After you successfully log into your MegaRAC G2 card, you are greeted with
the Welcome to MegaRAC G2 screen.
Note:
The default user name and password are in lower-case characters.
Note:
When you log in using the default user name and password, you have full administrative
powers. It is advised that once you log in, you change your user name and password. See the
Administrator Setup subsection under the MegaRAC G2 Configurations section of this chapter.
22
MegaRAC G2 User's Guide
Field
Default
User Name
racg2
Password
racg2
Continued
Advertisement
Table of Contents
