American Megatrends MegaRAC G2 User Manual page 109
American megatrends megarac g2 battery backup unit: user guide
Hide thumbs
Also See for MegaRAC G2:
- Datasheet (2 pages) ,
- Install manual (2 pages) ,
- Features (4 pages)
Table of Contents
Advertisement
MegaRAC G2 Card Configurations,
Updating Your MegaRAC G2 Card's Firmware, Continued
Step
Description
9
When you see this screen, it means that the firmware image is being upgraded. Once the upgrade's
progress reaches 100%, it is complete. The MegaRAC G2 card will reset itself. You must close the
browser and reconnect to the MegaRAC G2 card once this process is complete.
MegaRAC G2
Note: The
highly probable if you have flashed the Configuration section.
10
After the Firmware Upgrade Wizard has been completed successfully, the MegaRAC G2 card will
automatically reset itself. This is done in order for the image upgrade to take effect. You cannot perform
any other operation within your current Internet browser session
Close your Internet browser session and reconnect to your MegaRAC G2 card.
Continued
card's IP configuration can change as a result of the flash update. This is
Chapter Four : Using Your MegaRAC G2 Card
Cont'd
99
Advertisement
Table of Contents
