Step 8 Install The American Megatrends Megarac G2 Windows Host Components - American Megatrends MegaRAC G2 User Manual

Step 8 Install the American Megatrends MegaRAC G2 Windows Host
Components
American Megatrends MegaRAC G2 Windows Host Components is a collection of four
MegaRAC G2 host-side components. These programs are briefly explained in the
following table:
Program Description
G2 Mouse Booster The G2 Mouse Booster program allows you to speedup the cursor on the host system when
you use mouse redirection during Console Redirection.
G2ConfigApp The G2ConfigApp program allows you to configure the MegaRAC G2 card from the host
system or from a client system.
WinCuri The WinCuri program is a command prompt-based program that you can use to configure the
MegaRAC G2 card. It allows you all the functionality of both the Internet browser-based
Remote Access Companion for MegaRAC G2 and the G2ConfigApp program.
MegaRAC G2 The MegaRAC G2 Server Heartbeat is installed as a service in Windows. It is used to tell
Server Heartbeat whether the operating system on the host system is operating or not. It can also detect whether
the operating system was shutdown normally or abruptly.
Follow the steps outlined in the following table to install the American Megatrends
MegaRAC G2 Windows Host Components:
Step Description
1 Insert your MegaRAC G2 CD into the host system. The host system is the system that has the MegaRAC
G2 card installed into it. Browse to the following folder and file:
CDROM\HostSide\Win32\Setup.exe
2 Double left click the Setup.exe icon to begin the installation of the American Megatrends MegaRAC
G2 Windows Host Component.
3 The American Megatrends MegaRAC G2 Windows Host Component setup window opens. Left click the
Next button.
Chapter Two : Installing Your MegaRAC G2 Card
Cont'd
11