American Megatrends MegaRAC G2 User Manual page 122

G2ConfigApp,
Continued
Step Description
3 If you are running the G2ConfigApp program from a remote system, select the second radial button
labeled 'I want to connect to a G2 on the network'. Type in the MegaRAC G2 card's IP address in the
field to the right of Card IP. Type in your user name and password in the appropriate fields and left click
on the Ok button.
Note: You must know the
program from a remote system. Run the G2Seek program to find the
address.
4 The following G2 Config Application Dialog window appears:
The G2 Config Application Dialog window allows you to manage users, configure the network, flash the
MegaRAC G2 card's firmware and perform advanced configurations.
112 MegaRAC G2 User's Guide
MegaRAC G2
card's IP address before running the
G2ConfigApp
MegaRAC G2
card's IP
Cont'd