American Megatrends MegaRAC G2 User Manual page 158

Configuring the Modem,
Incoming Calls, Continued
Step Action
4 Left click the Save button.
Your MegaRAC G2 card can now be managed via the internal modem. See Chapter 4 : Using Your
MegaRAC G2 for more information on how to do the following:
•
configure and reset the MegaRAC G2 card
•
update the MegaRAC G2 card's firmware
•
view the MegaRAC G2 card's health information and event log
•
view the host system's health information
•
remotely control the host system's hardware reset and power cycle
Note: Use Dialup Networking to connect to the
username and password that you would use when accessing the
LAN.
Note:
Once you establish a dialup connection, open your Internet browser. Type in the IP address of
MegaRAC G2
the
Server IP Address field. You will be prompted for the username and password. Use the same
username and password that you would use when accessing the
LAN.
Note:
Host system health information is only available if you have a Sensor Definition Kit (SDK) file
for the host system's motherboard or it has a Baseboard Management Controller (BMC). The
BMC must be IPMI 1.0 compliant or greater.
Note: The optional modem is NOT designed for Console Redirection. However, you can still perform
Console Redirection, but it is debilitating and extremely slow.
See the Appendix F : Serial over LAN for more information on how to do the following:
•
text redirection using the serial port
Note: Use Dialup Networking to connect to the
username and password that you would use when accessing the
LAN.
Note:
Once you establish a dialup connection, open your telnet program, such as Hyper Terminal. Use
TCP/IP (Winsock) and port 100. Type in the IP address of the
address field. Use the same IP address that you typed in the Server IP Address field. You will be
prompted for the username and password. Use the same username and password that you would
use when accessing the
148 MegaRAC G2 User's Guide
Continued
MegaRAC G2
card into the address field. Use the same IP address that you typed in the
MegaRAC G2
MegaRAC G2
card over the LAN.
card's internal modem. Use the same
MegaRAC G2
card over the
MegaRAC G2
card over the
card's internal modem. Use the same
MegaRAC G2
card over the
MegaRAC G2
card into the host