Step 10 Connect to the MegaRAC G2 from a Client System,
Step
Description
3
Type in your Network Name. In this example, Your Network is the Network Name. Next, you must
enter a range of IP addresses that you want to search. In this example, the MegaRAC G2 card's IP
address is between 192.168.0.0 to 192.168.1.0. Left click the Add>> button when finished.
4
The name and IP range of the MegaRAC G2 will display in the right field. Place a check in the box next
to the range of IP addresses. Left click on the Next button.
20
MegaRAC G2 User's Guide
Continued
Cont'd