Displaying And Debugging Snmp; Snmp Configuration Example - 3Com 8807 Configuration Manual

Setting the Size of the
SNMP Packet
Sent/Received by an
Agent
Disabling SNMP Agent
Displaying and
Debugging SNMP
SNMP Configuration
Example
You can use the following commands to set the size of SNMP packet sent/received
by an agent.
Perform the following configuration in system view.
Table 688 Set the size of the SNMP packet sent/received by an agent
Operation
Set the size of the SNMP packet sent/received
by an agent
Restore the default size of the SNMP packet
sent/received by an agent
The agent can receive/send the SNMP packets of the sizes ranging from 484 to
17940, measured in bytes. By default, the size of an SNMP packet is 2000 bytes.
To disable SNMP Agent, perform the following configuration in system view.
Table 689 Disable snmp agent
Operation
Disable snmp agent
If users disable NMP Agent, it will be enabled whatever snmp-agent command is
configured thereafter.
After the above configuration, execute the display command in any view to
display the running of the SNMP configuration, and to verify the effect of the
configuration.
Table 690 Display and debug SNMP
Operation
Display the statistics information about SNMP
packets
Display the engine ID of the active device
Display the group name, the security mode,
the states for all types of views, and the
storage mode of each group of the switch.
Display SNMP user information in the group
user table
Display the current community name
Display the current MIB view
Display the contact character strings, location
character strings, and the SNMP version of the
system
Network requirements
Network Management Station and the switch are connected through the
Ethernet. The IP address of Network Management Station is 129.102.149.23 and

Displaying and Debugging SNMP

Command
snmp-agent packet max-size byte-count
undo snmp-agent packet max-size
Command
undo snmp-agent
Command
display snmp-agent statistics
display snmp-agent local-engineid
display snmp-agent group [ group-name ]
display snmp-agent usm-user [ engineid
engineid | group groupname | username
username ]*
display snmp-agent community [ read |
write ]
display snmp-agent mib-view [ exclude |
include | { viewname mib-view } ]
display snmp-agent sys-info [ contact |
location | version ]*
743