3Com 8807 Configuration Manual page 522

522 C 48: MPLS B
HAPTER
C C
ASIC APABILITY ONFIGURATION
Table 515 Display statistics information of static LSP
Operation
Displaying the MPLS statistics information or
LSP information of all ports or a single VLAN
interface
Displaying MPLS-enabled interfaces
After accomplishing the configuration tasks mentioned previously, you can
execute the display command in any view to view the information related to the
MPLS-enabled interfaces and thus to evaluate the effect of the configurations.
Table 516 Display information of the MPLS-enabled interfaces
Operation
Display information of the MPLS-enabled interfaces
Displaying MPLS LSP information
Execute the following commands in any view to display the information related to
MPLS LSP.
Table 517 Display the information about MPLS LSP
Operation
Display the information about MPLS LSP
Debugging MPLS
You may execute the debugging command in user view to debug the
information concerning all interfaces with MPLS function enabled.
As enabling debugging may affect the router performance, you are recommended
to use this command when necessary. Execute the undo form of this command to
disable the corresponding debugging.
Table 518 Enable/disable debugging for MPLS
Operation
Enable debugging for MPLS LSP
Disable debugging for MPLS LSP
Trap information of MPLS
This command is used to enable the trap function of MPLS during an LSP/LDP
setup process.
Perform the following configuration in system view.
Table 519 Enable the trap function of MPLS
Operation
Enable the LDP Trap function of MPLS
Disable the LDP Trap function of MPLS
Enable the LSP Trap function of MPLS
Command
display mpls statistics { interface {
Vlan-interface | all } | lsp { lsp-Index | all |
lsp-name }
Command
display mpls interface
Command
display mpls lsp [ include text | verbose ]
Command
debugging mpls lspm { agent | all | event | ftn |
interface | packet | policy process | vpn }
undo debugging mpls lspm { agent | all | event | ftn |
interface | packet | policy process | vpn }
Command
snmp-agent trap enable ldp
undo snmp-agent trap enable ldp
snmp-agent trap enable lsp