3Com 8807 Configuration Manual page 777

SSH Client Configuration
Table 725 Configure the compatibility mode
Operation
Set the server to be compatible with the SSH
1.x client
Set the server to be incompatible with the SSH
1.x client
By default, the server is compatible with the SSH 1.x client.
The following sections describe the SSH client configuration tasks.
Set to perform the first-time authentication on the SSH server to be accessed
■
Specifying the public key of the server
■
Configuring the first-time authentication of the server
■
Starting the SSH client
Use this configuration task to enable the SSH client, establish the connection with
the server, and carry out interactive session.
Perform the following configuration in system view.
Table 726 Start the SSH client
Operation Command
ssh2 { host-ip | host-name } [ port-num ] [ prefer_kex { dh_group1
| dh_exchange_group } ] [ prefer_ctos_cipher { des | 3des |
Start the SSH client aes128 } ] [ prefer_stoc_cipher { des | 3des | aes128 } ] [
prefer_ctos_hmac { sha1 | sha1_96 | md5 | md5_96 } ] [
prefer_stoc_hmac { sha1 | sha1_96 | md5 | md5_96 } ]
Specifying the public key of the server
Use this configuration task to allocate an existing public key to the client.
Perform the following configuration in system view.
Table 727 Specify the public key of the server
Operation
Specify the public key of the server
Cancel the corresponding relationship
between the server and the public key
Configuring the first-time authentication of the server
Use this configuration task to configure or cancel the first-time authentication of
the server performed by the SSH client.
The first-time authentication means that when the SSH client accesses the server
for the first time in the case that there is no local copy of the server's public key,
the user can choose to proceed to access the server and save a local copy of the
server's public key; when the client accesses the server next time, it uses the saved
public key to authenticate the server.
SSH Terminal Service
Command
ssh server compatible_ssh1x enable
undo ssh server compatible_ssh1x
Command
ssh client server-ip assign rsa-key keyname
undo ssh client server-ip assign rsa-key
777