Acl Configuration Tasks - 3Com 8807 Configuration Manual

ACL Configuration
Tasks
Table 144 Max ACL rules that can be activated on different interface cards
Interface card suppfix
3C17511
3C17512
3C17513
3C17514
3C17516
3C17526
3C17532
3C17532
3C17525
3C17527
3C17530
3C17531
A maximum of 12288 ACL rules can be activated on the whole service processor
card.
The following table describes the ACL configuration tasks for interface cards.
Table 145 ACL configuration tasks on interface cards
Item
Enter system view
Configure the time range
Define a flow template
Enter ACL view
Define a rule
Exit ACL view
Enter Ethernet port view
Apply a defined flow template
in Ethernet port view
MPLS support
MPLS not supported
MPLS supported
Command
system-view
time-range time-name {
start-time to end-time
days-of-the-week [ from
start-time start-date ] [ to
end-time end-date ] | from
start-time start-date [ to
end-time end-date ] | to
end-time end-date }
flow-template
user-defined slot slotid
template-info
acl { number acl-number |
name acl-name [ advanced |
basic | link ] } [ match-order
{ config | auto } ]
rule
quit
interface interface-type
interface-number
flow-template
user-defined

ACL Configuration Tasks

Max number of ACL rules
supported for each
card/interface
1024
1023
Description
-
Optional
Optional
Required
Required
-
The value of interface-type
can only be Ethernet port
type.
Optional. You can perform
this operation only when a
flow template has been
previously defined.
169