Rs-232 Default Parameters - Motorola LS2208-SR20001R Product Reference Manual

RS-232 Default Parameters

Table 6-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the Parameter Descriptions section beginning on
NOTE See
miscellaneous default parameters.
RS-232 Host Default Table
Table 6-1
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity Type
Stop Bit Select
Data Bits
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
1
User selection is required to configure this interface and this is the most common selection.
Appendix A, Standard Default Parameters
Parameter
page 6-4.
for all user preferences, hosts, symbologies, and
Default
1
Standard
9600
None
1 Stop Bit
8-Bit
Enable
None
None
2 Sec
Low RTS
Disable
0 msec
Normal Operation
Send Bar Code
RS-232 Interface 6 - 3
Page Number
6-6
6-8
6-10
6-12
6-12
6-13
6-14
6-16
6-18
6-19
6-19
6-20
6-21
6-21