Table of Contents
Advertisement
User Preferences
4 - 7
Laser On Time
This parameter sets the maximum time that decode processing continues during a scan attempt. It is
programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default Laser On Time is 3.0 seconds.
To set a Laser On Time, scan the bar code below. Next, scan two numeric bar codes beginning on
page D-1
in
Appendix D, Numeric Bar Codes
that correspond to the desired on time. Include a leading zero for single digit
numbers. For example, to set an On Time of 0.5 seconds, scan the bar code below, then scan the "0" and "5" bar
codes. To correct an error or change a selection, scan Cancel on
page
D-3.
Laser On Time
Hide quick links:
Advertisement
Table of Contents
