Connecting Using Wand Emulation - Motorola LS2208-SR20001R Product Reference Manual

9 - 2 Symbol LS2208 Product Reference Guide

Connecting Using Wand Emulation

To perform Wand Emulation, connect the scanner to a portable data terminal, or a controller which collects the
wand data and interprets it for the host.
Portable Data
Terminal
Wand Emulation Connection
Figure 9-1
Connect the Wand Emulation interface cable to the bottom of the scanner, as described in
1.
Interface Cable on page
Connect the other end of the interface cable to the Wand port on the portable data terminal or controller.
2.
Scan the appropriate bar codes in this chapter to configure the scanner.
3.
Wand Port
1-3.
Interface Cable
Installing the