Printer Memory; Include Types In Application Source List Selection; Alternate Letterhead Mode - HP LaserJet 2605, 2605dn, 2605dtn Reference

Use the following procedure to configure a font DIMM:
1. Make sure that the font DIMM is correctly installed.
2. Click Add. The Add Font DIMM dialog box appears.
3. Click Browse. The Font DIMM Files dialog box appears.
4. Find and select the appropriate Printer Cartridge Metrics (.PCM) file that came with the font DIMM.
5. Click Open.
6. If you want to, specify a Font DIMM Name in the Add Font DIMM dialog box.
7. Click OK. The selected printer cartridge metrics (.PCM) file appears in the Installed DIMMs list.
Select the .PCM file to see a list of available fonts in the Fonts on DIMM list.
8. Click OK to close the Add Font DIMM dialog box. The fonts on the DIMM should now be available
on the system.
NOTE
designed to work with that DIMM. If no screen fonts are available for the DIMM, use the .PCM
file that is specifically designed to work with that DIMM.

Printer Memory

The Printer Memory group box contains the following information:
● Total Memory. This shows the total amount of memory that is physically installed in the printer.
Total Printer Memory updates after a successful bidirectional query.
●
Driver Work Space. Use the Driver Work Space (DWS) option to specify the amount of work-
space memory available to the printer. In environments that support bidirectional communication,
this option is configured automatically. To set DWS manually, print a configuration page and find
the DWS value in the Memory section of the configuration page. The DWS value might change if
you switch printer-model settings. Then, type that value in the DWS box in the More Configuration
Options dialog box. An accurate DWS value optimizes driver performance.

Include Types in Application Source List selection

When the Include Types in Applications Source List check box is selected, all paper types (such as
envelopes and transparencies) that are supported by the printer are available from a software program's
paper source list in the Page Setup dialog.
When you are in a software program, you can open the Page Setup dialog by clicking the File menu,
and then clicking the Page Setup button.

Alternate letterhead mode

When selected, this option enables you to always load letterhead or preprinted paper the same way for
all print jobs, whether you are printing on one side of the sheet or on both sides of the sheet. Load the
paper as you would for printing on both sides. See the user documentation that came with the printer
230 Chapter 6 Windows HP Traditional PCL 6 Driver features
To install screen fonts that match the font DIMM, use the .HPB file that is specifically
ENWW