Custom; Figure 6-16 Back Cover Setting - HP LaserJet 2605, 2605dn, 2605dtn Reference

Figure 6-16 Back Cover setting
The following are the Back Cover options:
●
Add a Blank or Preprinted Cover check box. When you select Back Cover, you must also select
the Add a Blank or Preprinted Cover check box to enable the setting. When you select this check
box, the Source is: and Type is: drop-down menus become available and a check mark appears
next to the Back Cover option.
NOTE
setting is enabled on the Finishing tab. The back cover setting is unavailable, because this
page would otherwise be printed in the middle of a booklet.
●
Source is: drop-down menu. The Source is: setting specifies the source tray to use for adding a
back cover to the document. The list of source trays depends on the printer accessories. Any
optional media trays that are installed through the Configure tab also appear here. For more
information about the Source is: setting, see the
●
Type is: drop-down menu. The Type is: drop-down menu shows all of the media types that the
printer supports. For more information about the Type is: drop-down menu settings, see the Type
is: in the Type is: drop-down menu

Custom

The Custom Paper Size dialog box appears when you click the Custom button on the Paper tab. The
following figure shows the initial appearance of the Custom Paper Size dialog box.
NOTE
and any setting other than First Page is also selected.
214 Chapter 6 Windows HP Traditional PCL 6 Driver features
The Back Cover options are not available when the Booklet Printing Layout
The Custom button is not available when Use Different Paper/Covers is selected
Source Is: setting
section of this chapter.
section of this chapter.
ENWW