Figure 7-33 Snmp Screen - HP LaserJet 2605, 2605dn, 2605dtn Reference

Figure 7-33 SNMP screen
The following options are available on the SNMP screen:
●
Enable SNMP v1 read-write access. Select this option to enable SNMP V1 agents on the printer.
Custom community names can be configured to control management access to the HP Color
LaserJet 2605 series printer.
●
Set Community name: Type the SNMP Set Community Name (password) to allow SNMP
information to be configured (or written) on the printer.
●
Confirm Set Community name: Retype the SNMP Set Community Name (password) to
allow SNMP information to be configured (or written) on the printer.
● Get Community name: Type the SNMP Get Community Name (password) to allow SNMP
information to be read from the printer.
●
Confirm Get Community name: Retype the SNMP Get Community Name (password) to
allow SNMP information to be read from the printer.
●
Disable SNMP v1 default Get Community name of "public". Select this option to disable
the default Get community name "public". If you select this option, you will need to type values
in the Get Community name and Confirm Get Community name fields.
●
Enable SNMP v1 read-only access (uses "public" for the Get Community value). Select this
option to enable the SNMP V1 agents on the HP Color LaserJet 2605 series printer, but limit access
to read-only. Write-access is disabled. The default Get Community name "public" is automatically
enabled.
●
Disable SNMP v1. Select this option to disable the SNMP V1 agents on the HP Color LaserJet 2605
series printer, which is recommended for secure environments. If SNMP V1 is disabled, some port
monitors or discovery utilities might not operate properly.
286 Chapter 7 The HP ToolboxFX ENWW