Send Ctrl-D Before Each Job; Send Ctrl-D After Each Job; Convert Gray Text To Postscript Gray; Convert Gray Graphics To Postscript Gray - HP LaserJet 2605, 2605dn, 2605dtn Reference

Send CTRL-D Before Each Job

This option specifies whether the HP Color LaserJet 2605 series printer will be reset at the beginning
of every .PS document. The default setting is No. Ctrl-D resets the printer to its default setting to ensure
that previous print jobs do not affect the current print job. Ctrl-D might cause a print job to fail if the printer
is connected through a network. If your document fails to print when sent to a printer connected through
a USB port, change No to Yes.

Send CTRL-D After Each Job

This option specifies whether the HP Color LaserJet 2605 series printer will be reset at the end of
every .PS document. The default setting is Yes. Ctrl-D resets the printer to its default setting to ensure
that future print jobs are not affected by the current print job. Ctrl-D might cause a print job to fail if the
printer is connected through a network. If your document fails to print when sent to a network printer,
change Yes to No.

Convert Gray Text to PostScript Gray

This option specifies whether to convert the true gray (RGB value) in text to the gray that the
PS Emulation Unidriver provides. The default setting is No.

Convert Gray Graphics to PostScript Gray

This option specifies whether to convert the true gray (RGB value) in graphics to the gray that the
PS Emulation Unidriver provides. The default setting is No.

Add Euro Currency Symbol to PostScript Fonts

This option specifies whether to augment the device fonts with the euro character. The default setting
is Yes.

Job Timeout

This option specifies how long the document can take to get from the computer to the HP Color
LaserJet 2605 series printer before the printer stops trying to print the document. If you specify 0
seconds, the printer continues trying to print indefinitely. The default setting is 0 seconds. You can use
the spin box to change this value to a maximum of 32,767 seconds.

Wait Timeout

This option specifies how long the HP Color LaserJet 2605 series printer waits to get more PS
information from the computer. After the specified time passes, the printer stops trying to print the
document and prints an error message. If you are trying to print a very complicated document, you might
want to increase this value. If you specify 0 seconds, the printer waits indefinitely. The default setting
is 300 seconds. You can use the spin box to change this value to a maximum of 32,767 seconds.
ENWW Device Settings tab features 181