Copies; Orientation; Document Preview Image; About - HP LaserJet 2605, 2605dn, 2605dtn Reference

Copies

Use the Copies group box to specify the number of copies to print.
The number of copies you request appears in the Copies box. You can select the number by typing in
the box or by using the up and down arrows to the right of the edit box. Valid entries are numbers
from 1 to 999. The copies value will not advance from the maximum number (999) to 1 when the up
arrow is used, or change from 1 to the maximum number (999) when the down arrow is used. Invalid
entries into the edit box (such as non-numerical input, numbers less than 1 or greater than the maximum
allowed) change to the last valid value that appeared in the box when you click another group box or
leave the Basics tab. The default number of copies is 1.
Because you can set the desired number of copies that you want from some software programs, conflicts
can arise between the software program and the driver. In most cases, the software program and the
driver communicate, so that the number of copies set in one location (such as the software program)
will appear in the other (such as the driver). For some programs, this communication does not happen,
and the Copies values are treated independently. For these programs, setting 10 copies in the program
and then setting 10 copies in the driver will result in 100 copies (10 x 10) being printed. It is recommended
to set the number of copies in the software program, wherever possible.

Orientation

Orientation refers to the layout of the image on the page, and does not affect the manner in which
media feeds into the printer. You can specify the orientation of the print job.
You can toggle between portrait and landscape orientation by left-clicking the preview image. If you
select Rotate by 180 degrees, no change is evident in the preview image.
The Orientation group box contains the following options:
● Portrait option button. Select this option to print your document in Portrait orientation. This is the
default setting.
●
Landscape option button. Select this option to print your document in Landscape orientation.
●
Rotate 180 degrees check box. Select the Rotate by 180 degrees check box to rotate the
document image on the paper 180°.

Document preview image

The document preview image is a line-drawn color image of a page that represents graphics and text.
The image is always oriented so that the contents of the page are right-side-up. The preview image
appears in the upper-right corner of all Properties tabs except for the Configure tab. For more
information, see the

About

By clicking the About button on the Basics tab or the HP logo on any of the driver property pages,
the About box appears. To close the About box, click OK, press Esc, press
The following figure shows the About box. The information varies according to HP Color LaserJet 2605
model number, driver, date, and version numbers.
ENWW
Finishing tab features section of this chapter.
HP Traditional PCL 6 Driver features (for Windows 98 SE and Windows Me)
Alt + F4, or press Enter.
221