Onkyo TX-NR1010 Instruction Manual page 49

Listening Mode Description
• Dolby Pro Logic IIz Height + THX
Cinema
• Dolby Pro Logic IIz Height + THX
Music
• Dolby Pro Logic IIz Height + THX
Games
The combination of Dolby Pro Logic IIz
Height and THX Cinema/Music/Games
modes can be used.
The PLIIz and THX indicators light on the
AV receiver's display.
• DTS Neo:X Cinema + THX Cinema
• DTS Neo:X Music + THX Music
• DTS Neo:X Game + THX Games
The combination of DTS Neo:X
Cinema/Music/Game and THX Cinema/
Music/Games modes can be used. The
Neo:X indicator lights on the AV
receiver's display.
• THX Ultra2 Cinema
N e o T H X : U 2 6 C i n e m a
This mode expands 5.1-channel sources for
7.1- channel playback. It does this by
T H X U 2 M u s i c analyzing the composition of the surround
source, optimizing the ambient and
directional sounds to produce the surround
T H X U 2 G a m e s
back channel output.
• THX Ultra2 Music
T H X S u r r E X
This mode is designed for use with music.
It expands 5.1-channel sources for 7.1-
channel playback.
• THX Ultra2 Games
This mode is designed for use with video
games. It can expand 5.1-channel sources
for 6.1/7.1-channel playback.
• THX Surround EX
This mode expands 5.1-channel sources for
6.1/7.1- channel playback. It's especially
suited to Dolby Digital EX sources. THX
Surround EX, also known as Dolby Digital
Surround EX, is a joint development
between Dolby Laboratories and THX Ltd.
Input Speaker Listening Mode
Source Layout
S .
D +
F }
G
H
nm
D ,
Note
H +
*1 Pure Audio cannot be selected when Zone 2/3 is active.
*
Besides, if you activate Zone 2/3 while Pure Audio is selected, the listening mode will
automatically switch to Direct.
*2 Based on the audio channel signal contained in the source, the corresponding speakers will output
the sound.
*3
The AV receiver can input the DSD signal from HDMI IN. Depending on the player, setting the
output on the player side to PCM might bring better sound.
*4 For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system.
*5 DTS is used depending on the configuration of the AV receiver.
*6 If there are no surround back speakers, DTS is used.
*7
If there are no surround back speakers, Dolby Pro Logic II is used.
*8 DTS Neo:X cannot be selected in the case of 192 kHz input signals.
*9 This listening mode can be selected only when all the following conditions are satisfied:
– Center speaker is connected.
– Either the front high or front wide speakers are connected.
• The listening modes cannot be selected with some source formats.
En-49
Turning On & Basic Operations
Description
• Dolby Pro Logic II Game + THX Ultra2
Games
The combination of Dolby Pro Logic II
Game and THX Ultra2 Cinema modes can
be used. The PLII and THX indicators
light on the AV receiver's display.
• Dolby Pro Logic IIz Height + THX
Ultra2 Games
The combination of Dolby Pro Logic IIz
Height and THX Ultra2 Games modes can
be used.
• Dolby Pro Logic IIz Height + THX
Ultra2 Cinema
• Dolby Pro Logic IIz Height + THX
Ultra2 Music
The combination of Dolby Pro Logic IIz
Height and THX Ultra2 Cinema/Music
modes can be used.
Input Speaker
Source Layout
S ,
+
*
S +
D
H
D +
H