Connecting Components With Hdmi - Onkyo TX-NR1010 Instruction Manual

Connecting Components with HDMI

Personal computer
Game console
Set top box/digital video recorder, etc.
* If your TV doesn't support Audio Return Channel (ARC), you
need to connect an optical digital cable together with the HDMI
cable to the AV receiver.
* When listening to an HDMI component through the AV
receiver, set the HDMI component so that its video can be seen
on the TV screen (on the TV, select the input of the HDMI
component connected to the AV receiver). If the TV power is off
or the TV is set to another input source, this may result in no
sound from the AV receiver or the sound may be cut off.
Satellite/cable set-top box, etc.
Connect your components to the appropriate jacks. The
default input assignments are shown below.
✔: Assignment can be changed
Jack Components
IN1 Blu-ray Disc/DVD player
IN2 Satellite/cable set-top box, etc.
IN3 Set top box/digital video recorder, etc.
IN4 Game console
IN5 Game console
IN6 Personal computer
IN7 Other components
IN8 Other components
Front Camcorder, etc.
OUT MAIN TV
OUT SUB Projector, etc.
See also:
• "Connection Tips and Video Signal Path"
• "Using an RIHD-compatible TV, Player, or Recorder"
(➔ page 111)
(➔ page
• "About HDMI"
TV, projector, etc.
Blu-ray Disc/DVD player
(➔ page 61).
✔
✔
✔
✔
✔
✔
✔
✔
(➔ page 107)
113)
En-18
Tip
• To listen to the audio of a component connected via HDMI
through your TV's speakers, enable "HDMI Through"
(➔ page 80) and set the AV receiver to standby mode.
Note
• In the case of Blu-ray Disc/DVD players, if no sound is output
despite following the above-mentioned procedure, set your Blu-
ray Disc/DVD player's HDMI audio settings to PCM.
■
Audio Return Channel (ARC) function
The Audio Return Channel (ARC) function enables an
HDMI capable TV to send the audio stream to HDMI OUT
MAIN on the AV receiver.
• This function can be used when:
– Your TV is ARC capable, and
– The TV/CD input selector is selected, and
"On"(➔ page
– "HDMI Control(RIHD)" is set to
– "Audio Return Channel" is set to "Auto"
■
MHL (Mobile High-Definition Link)
With its support for MHL (Mobile High-Definition Link),
the AUX (Front) input allows you to deliver high-
definition video from a connected mobile device.
Connections
Camcorder, etc.
79), and
(➔ page 80).