What Do You Want To Do With This Unit - Yamaha RX-V461 Owner's Manual

Case C: "I want to listen to a music program from
the FM radio station..."
Press F SCENE 4 (or
E SCENE 4) to select
"Radio Listening".
Notes
• To use the "Radio Listening" template, you must tune into
the desired radio station in advance. See pages 40 to 42 for
tuning information.
• To achieve the best possible reception, orient the
connected AM loop antenna, or adjust the position of the
end of the indoor FM antenna.
y
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 28 for details.
After using this unit...
Press 1 STANDBY/ON on the front panel to set
this unit to the standby mode.
This unit is set to the standby mode. In the standby mode,
this unit consumes a small amount of power in order to
receive infrared signals from the remote control. To turn
on this unit from the standby mode, press 1 STANDBY/
ON (or M POWER). See page 21 for details.
Note
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.
What do you want to do with this
unit?
Customizing the SCENE templates
• Using various SCENE templates
• Creating your original SCENE templates
Using various input sources
• Basic controls of this unit
• Enjoying FM/AM radio programs
• Using your USB portable device with this
unit
Using various sound features
• Using various sound field programs
• Using the pure direct mode for the high
fidelity sound
• Customizing the sound field programs
Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room
(AUTO SETUP)
• Manually adjusting various parameters of
this unit
• Setting the remote control
• Adjusting the advanced parameters
Additional features
Automatically turning off this unit
Quick start guide
P. 28
P. 31
P. 32
P. 40
P. 46
P. 37
P. 34
P. 39
P. 24
P. 49
P. 59
P. 63
P. 36
9
En