Sharp CD-CH1500 Operation Manual page 27

Timer and Sleep Operation (Continued)
Sleep operation
1
Play back the desired sound source.
2
Press the MENU button.
3
Turn the jog dial to select "SLEEP".
Then press the ENTER button.
To change the sleep time:
While the sleep time is displayed, turn the jog dial.
(Maximum: 2 hours - Minimum: 30 minutes)
4
Press the ENTER button.
5
Your system will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
Note:
Once the sleep time is set, it will remain unchanged until the setting is changed.
To cancel the sleep operation:
Press the POWER button while the sleep timer is set.
To confirm the remaining sleep time:
Perform the above steps 2 - 3.
This time you can also change the sleep time.
To use timer and sleep operation together
Example: To fall asleep and wake to the same radio station
You can play back the same source only (the function cannot be switched).
1
Set the desired playback or recording time (steps 1 - 8, pages 25
- 26).
2
While playing the desired source, set the sleep time (see left,
steps 1 - 4).
1. Timer playback (recording) setting
2. Sleep timer setting
An interval of 3 minutes
or more is required.
30 minutes - 2 hours
Sleep operation will
automatically stop.
End time
Desired time
Timer playback
(recording) start time
27