Sharp CD-CH1500 Operation Manual page 17

7
Press the 06 06 button to start playback.
06 06 06
Playback will begin from track 1 on the DISC 1.
After that disc finishes playing, the next disc will automatically start playback.
When there is no CD in one of the disc tray 1 - 6 positions, that position will
be skipped and the next CD will be played.
When the last track on the DISC 6 has finished playing, the CD player will
stop automatically.
To interrupt playback:
Press the 06 button.
To resume playback from the same point, press the 06 button again.
To stop playback:
Press the button.
To exchange other CDs while playing a disc:
Press the CD 7 button for the stopped disc and exchange discs.
To remove the CDs:
While in the stop mode, press the desired CD 7 button.
After use:
Press the POWER button to enter the power stand-by mode.
Caution:
Do not place two CDs in one disc tray.
Do not push the disc tray while it is moving.
If the power fails while the tray is open, wait until the power is restored.
If the disc tray is stopped forcibly, "E-CD20" will appear in the display and the unit
will not function.
If this occurs, press the POWER button to enter the power stand-by mode and then
turn the power on again.
If TV or radio interference occurs during CD operation, move the unit away from the
TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
To locate the beginning of a track
To move to the beginning of the next track:
Turn the jog dial slowly clockwise by one position during playback.
You can skip to any track by turning the jog dial until the de-
sired track number appears.
To restart the track being played:
Turn the jog dial slowly counterclockwise by one position during playback.
You can skip to any track by turning the jog dial until the de-
sired track number appears.
Notes:
You can locate the beginning of a track on a single disc only.
The 5 or 4 button on the remote control allows you to locate the beginning of a
track.
To locate the desired portion
For audible fast forward:
Press and hold down the 2 button during playback.
For audible fast reverse:
Press and hold down the 3 button during playback.
Notes:
Normal playback will resume when the 3 or 2 button is released.
When the end of the last track is reached during fast forward, "DISC END" will
appear on the display and CD operation will be paused. When the beginning of the
first track is reached during fast reverse, the disc will start playback automatically.
You can locate the desired portion on a single disc only.
17