Programmed Play - Sharp CD-CH1500 Operation Manual

Programmed Play

Up to 32 tracks can be programmed.
1
While in the stop mode, press the MEMORY button to enter the
programming save mode.
2
Press one of the DISC 1 - DISC 6 buttons to select the desired disc.
Selected disc number
3
Turn the jog dial to select the desired track.
Selected track number
4
Press the MEMORY button to save the track number.
5
Repeat steps 2 - 4 for other tracks.
Up to 32 tracks can be programmed.
6
Press the
7
Press the 06
At this time, playback will not begin even if one of the DISC 1 - DISC 6 buttons
is pressed.
To clear the programmed selections:
Press the CLEAR button while the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be cleared, beginning with the last track
programmed.
To cancel the programmed play mode:
While in the stop mode, press the CLEAR button. The "MEMORY" indicator will disap-
pear and all the programmed content will be cleared.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator will be displayed.
Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the last track
of the original program.
Playback order
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the 5 or 4 button.
Notes:
Opening any tray of the programmed discs automatically cancels the programmed
sequence.
Even if you press the POWER button to enter the stand-by mode or change the
Playback time
function from CD to another function, the programmed selections will not be cleared.
During program operation, random play is not possible.
button.
06 button to start playback.
06 06 06
19