To Specify A Disc To Play; Switching The Time Display; Repeat Or Random Play - Sharp CD-CH1500 Operation Manual

Audio tower system
Hide thumbs Also See for CD-CH1500:
Table of Contents

Advertisement

To specify a disc to Play

You can play a disc by specifying the disc number.
Press one of the DISC 1 - DISC 6 buttons to play the desired disc.
Selected disc number
Only the chosen disc will be played and stopped automatically.
Note:
When one of the DISC 1 - DISC 6 buttons is green, it is ready to play that disc.
If there is not a disc on the tray, playback will not begin and the button will turn dark.
To stop playback:
Press the
button.

Switching the time display

Each time the TIME button on the remote control is pressed during playback or in the
pause mode, the display will change.
The elapsed playing time for the current track
will be displayed.
The remaining playing time for the current
track will be displayed.
The total remaining playing time for the disc
will be displayed.
Notes:
During random play, the total remaining playing time will not be displayed.
Depending on the CD, the playing time display may not match the total playing time
which is indicated on the CD jacket, as the time between the tracks is not included.
18

Repeat or Random Play

You can select one of the CD playback mode; "Repeat play", "Random play" and "Nor-
mal play".
1
Press the PLAY MODE button repeatedly to select the playback
mode.
Repeat playback mode
Normal playback mode
2
Press the 06
06 or DISC 1 - DISC 6 button to start playback.
06
06
06
or
If playback is started by pressing the 06 button, repeat or random play will
be performed on all discs.
If playback is started by pressing one of the DISC 1 - DISC 6 buttons, repeat
or random play will be performed on that disc.
To repeat a programmed sequence:
Perform steps 1 - 6 in the "Programmed Play" section, select the repeat playback and
then press the 06 button.
Notes:
After performing repeat or random play, be sure to press the
Otherwise, the disc(s) will play continuously.
In random play, the CD player will select and play tracks automatically.
(You cannot select the order of the tracks.)
To cancel repeat and random play:
Press the PLAY MODE button repeatedly to select the normal playback mode.
Random playback mode
button.

Advertisement

Table of Contents
loading

Table of Contents