Listening To The Radio - Sharp CD-CH1500 Operation Manual

Listening to the Radio

20
Sound Control (See page 14.)
1
Press the POWER button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING (X X X X X or W W W W W ) button to tune in to the desired sta-
tion.
Manual tuning:
Press the TUNING (X or W) button as many times as required to tune in to the
desired station.
Auto tuning:
When the TUNING (X or W) button is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will stop at the first receivable
broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop automatically at
that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (X or W) button again.
To receive an FM stereo transmission:
Press the ST-MODE button on the remote control to display the "ST" indicator.
"j" will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the ST-MODE button. The "ST" indicator goes
out. The reception changes to monaural, and the sound becomes clearer.
After use:
Press the POWER button to enter the power stand-by mode.
FM stereo mode indicator
FM stereo receiving indicator