Remote Control; Battery Installation - Sharp CD-CH1500 Operation Manual

Audio tower system

Hide thumbs Also See for CD-CH1500:

Table of Contents

Remote Control

Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).

Batteries are not included.

1. Remove the battery cover.

2. Insert the batteries according to the direction indicated in the bat-

tery compartment.

When inserting or removing the batteries, push them toward the ë battery

terminals.

3. Replace the cover.

Precautions for battery use:

Replace all old batteries with new ones at the same time.

Do not mix old and new batteries.

Remove the batteries if the unit will not be used for long periods of time. This will

prevent potential damage due to battery leakage.

Caution:

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Installing the batteries incorrectly may cause the unit to malfunction.

Notes concerning use:

Replace the batteries if the operating distance is reduced or if the operation be-

comes erratic.

Periodically clean the transmitter on the remote control and the sensor on the ste-

reo system with a soft cloth.

Exposing the sensor on the stereo system to strong light may interfere with opera-

tion. Change the lighting or the direction of the stereo system.

Keep the remote control away from moisture, heat, shock, and vibrations.

Test of the remote control

Face the remote control directly to the remote sensor on the unit.

The remote control can be used within the range shown below:

Press the POWER button. Does the power turn on? Now, you can enjoy the music.

Remote sensor

8" - 20'

(0.2 m - 6 m)

Table of Contents