Editing Information On The History Tab - Kodak LED II PRINTER 20R - OPERATOR'S GUIDE Operator's Manual

Additional Calibration Information
Attribute
Keep History For (days)
Log Type
Keep log for (days)
Log File Name
C-26

Editing Information on the History Tab

The History tab specifies information about maintaining calibration history data.
The values displayed in the example are the default settings.
Indicates the number of days that the calibration LUT, print LUT,
density data and LUT history information (LED trend data) are to
be kept. Information older than the specified number of days will be
deleted.
Indicates the type of log file available during calibration. All
recordable events or just the recordable errors can be logged to a
selected filename.
Indicates the number of days that the error and events information
is to be kept. Information older than the specified number of days
will be deleted.
The name of the file that contains the logged information.
To edit the configuration information on the History tab:
1. Change the History information as needed.
2. If you have completed all editing of configuration information (including
information on the other tabbed screens), click OK to save the changes and
close the Edit Configuration screen.
NOTE: Click Cancel to cancel all changes made to the Edit Configuration
screen and close the Edit Configuration screen.
3. To continue making changes to the Edit Configuration, click on another tab
and make changes as needed.
Description
September 2000