Handling And Storing The Paper; Storing Paper By Using The Soft Shutdown Feature; About Printing; Image Size - Kodak LED II PRINTER 20R - OPERATOR'S GUIDE Operator's Manual

Handling and Storing the Paper

About Printing

September 2000
Follow the instructions included with the paper for storing and handling the paper
properly.
IMPORTANT: Avoid storing paper in low humidity conditions.

Storing Paper by Using the Soft Shutdown Feature

The Soft Shutdown feature (see "Soft Shutdown" on page 2-8) causes the rollers
to automatically reverse to rewind the lead edge of the paper to the first metering
roller during the soft shutdown process.
•
A print job is not printed until it is completely downloaded to the printer.
•
Print jobs are printed in the order they are received.
•
If multiple copies of a print job are requested, they are positioned next to each
other down the length of the roll, regardless of the width of the image.
•
It takes the same amount of time to print (expose the paper) a length of 6.5
inches as it does to print 33 inches.

Image Size

The minimum image length is 6.5 inches (1625 pixels). White space will
automatically be added to images smaller than 6.5 inches to increase the image
size to this minimum.
The maximum image length is approximately 33 inches (8248 pixels).
Buffered and Unbuffered Jobs (or Deferred and
Immediate)
Jobs can be stored in memory when downloaded from the host until enough jobs
are downloaded to maximize the printing that occurs during the print cycle.
Most host applications have an option to indicate whether to print the job as soon
as it completes downloading to the printer or to wait until the printer has a full
buffer to print.
If the print job is sent down to the printer with the Unbuffered/Immediate option,
the job will be printed as soon as it completes downloading to the printer.
Regardless of the number of (or size of) the jobs in the printer waiting to print, jobs
sent down with this option will be printed separately.
Operating Procedures
3-37