Table of Contents
Advertisement
Keeping the printer in good working order
To keep the printer in good working order:
•
Keep the printer clean. Keep the surrounding area vacuumed and
litter-free.
•
Protect the printer from tobacco smoke, dust, sand, and liquid spills.
•
Do not place objects on top of the printer.
•
Do not keep anything under the printer. Doing so may block the fan on
the bottom of the printer.
Working with the printer
Follow these guidelines when working with the printer:
•
Keep the plastic dust cover in place when operating the printer.
•
Keep the blue protective cover in place when not using the printer.
•
Remove prints from the output tray ONLY AFTER the printer ejects
them.
•
Do NOT put a print back into the output tray. Doing so can cause jams
and loss of completed prints.
•
Avoid loading more than 100 sheets of paper in the paper tray.
October 1997
Operating the printer
3-19
Advertisement
Table of Contents
