Shelf Support / Telescopic Pull-Outs - NEFF U1644N0GB How To Connect

Shelf support
Telescopic pull-outs
Note
Mini oven
44
Removing
1.
Pull the shelf support out of its bearing bush.
2.
Remove the shelf support.
Clean the shelf support using washing-up liquid and
pan scrapers or brushes.
Attaching
After cleaning, re-install the shelf support, following
the instructions in reverse order.
Removing
1.
Press the coach spring down.
2.
Push the telescope upwards and remove it.
Clean the telescopic pull-outs using washing-up
liquid and pan scrapers or brushes.
Attaching
Insert the telescopic pull-out at the rear.
Insert the telescopic pull-out into the guide and press
down until it locks into position.
Always insert the telescopic pull-outs all the way.
Do not close the oven door until all telescopic
pull-outs have been inserted.
Attention: The telescopic pull-outs become hot
when the oven is on. Risk of burns when the
telescopic pull-outs are pulled out.
Only 1 pair of telescopic rails may be installed in
the mini oven ( shelf position 1 or 2 ).