Omron Z5FP-MC10 Setup Manual page 6

INTRODUCTION
Product specifications and accessories may be changed at any time based on improvements and other
reasons.
It is our practice to change model numbers when published ratings or features are changed, or when
significant construction changes are made. However, some specifications of the products may be
changed without any notice. When in doubt, special model numbers may be assigned to fix or establish
key specifications for your application on your request. Please consult with your OMRON representative
at any time to confirm actual specifications of purchased products.
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when
tolerances are shown.
The information in this manual has been carefully checked and is believed to be accurate; however, no
responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
The following signal words are used in this manual.
WARNING
The following alert symbols are used in this document.
Cautions to indicate potential laser beam hazard
4
Setup Manual
CHANGE IN SPECIFICATIONS
DIMENSIONS AND WEIGHTS
ERRORS AND OMISSIONS
Meanings of Signal Words
Indicates a potentially hazardous situation which, if not avoided, will result in minor or
moderate injury, or may result in serious injury or death. Additionally there may be
significant property damage.
Meanings of Alert Symbols