Omron Z5FP-MC10 Setup Manual page 49

Controller
Z5FP-MC10
Connector
4.1
8
32.5
66.5
2 7.62=15.24
General specifications
Power supply voltage
Current consumption
Insulation resistance
Dielectric strength
Leakage current
Noise resistance
Vibration resistance
Shock resistance
Ambient temperature
Ambient humidity
Ambient environment
Ground
Degree of protection
83.7
10
98.1
3.85
21.6 to 26.4 V DC
1 A max. (with 2 sensors connected) *1
Between the group of external DC terminals and the ground terminal:
20 MΩ max. (at 100 V DC mega) (when the built-in surge absorber is removed)
Between the group of external DC terminals and the ground terminal:
1000 V AC at 50/60 Hz (when the built-in surge absorber is removed)
10 mA max.
1500 Vp-p; Pulse width: 0.1 µs/1 µs; Rising edge: 1-ns pulse
10 to 150 Hz (at a double amplitude of 0.1 mm) for 8 minutes each in the X, Y, and
Z directions
200m/s ; 3 times each in 6 directions
2
0 to +50°C at operation, -15 to +60°C at storage (no freezing and condensation)
Operating and storage: 35% to 85% (no condensation)
No corrosive gases
D-type ground (ground resistance 100Ω or less) * conventional class 3 ground
IEC60529 IP20 (in-panel)
87.9
75.5 3.85
9 7.7=69.3
9 7.7=69.3
23.6
81.71
195
Indicator
10
24.5 20
185
148.38
8 7.7=61.6
9 7.7=69.3
99.5
SECTION 4
Appendix
(Unit mm)
Four, 4.5-dia.
holes
47
Setup Manual