Table of Contents
Advertisement
Please observe the following precautions to prevent failure to operate, malfunctions, or undesirable
effects on product performance.
Installation of the Controller
Installation Site
Do not install the Controller in locations subjected to the following conditions:
• Ambient temperature outside the range of 0 to +50°C
• Condensation due to rapid temperature fluctuations
• Relative humidities outside the range of 35 to 85%
• Corrosive or flammable gases
• Dust, salt, or iron particles
• Direct vibration or shock
• Reflection of intense light (such as other laser beams or electric arc-welding machines)
• Strong magnetic fields
• Direct sunlight
• Contact with water, oil, and chemical agents
Mounting of the Controller
To improve heat dissipation, install the controller in the following direction only:
Do not install the controller in the orientations shown in the following diagram.
Precautions for Correct Use
INTRODUCTION
Setup Manual
9
Advertisement
Table of Contents
