Communication Command - Omron V670 Series User Manual

5-6 Communication Command

Communication commands to communicate with a tag are described here in this section. The commands are described assuming that
1:1 protocol is used. If 1:N protocol is used, follow the 1:N protocol format. (For details of protocol format, refer to "5-2 Command
Response Format".)
Example of sent data
Command code
1:1 Protocol
Example of received data
Command code
Example of sent data
1:N Protocol
Example of received data
Data
Retransmis- Status
Termination code sion flag flag
Node No. Command code
Node No. Command code Termination
Terminator
Data
Data Terminator
Retransmis- Status
sion flag flag Data
Terminator
Terminator
5-9