Table of Contents
Advertisement
3-3 Tag
3-3-1 Installation Site
Do not install the tag at any place below:
• Place where there is corrosive gas, flammable gas or iron powder.
• Place where the ambient temperature is out of the range between -10 and +70°C, where the temperature fluctuates considerably and
where condensation occurs.
• In a microwave oven.
3-3-2 How to Install
Install the tag according to the following instructions:
• Neither shave, drill nor machine the tag.
• Do not apply any excessive force to the tag.
• Neither contact the tag and any metal with each other nor install the tag near any metal.
* When the tag is used in both high temperature and low temperature, the tag may bend. However, the function is not affected.
♦ Model V670-D13F03
• Tag installation direction
Antenna
Marking side
Install this tag so that the tag surface can be in parallel with the antenna.
• Example of tag installation
Install the tag with the screws.
M3 screw (Tightening torque: 0.6 N•m or less)
(Unit: mm)
3-18
Advertisement
Table of Contents
