Table of Contents
Advertisement
7-3 Connection of Programming Console
To connect the programming console to the controller, the cable model V700-P10 (unbundled) is required. A key sheet comes with the
cable model V700-P10.
7-3-1 Inserting Key Sheet
As shown below, insert the dedicated key sheet into the slit at the top of programming console. Insert the key sheet pressing it with your
fingers softly until the key sheet has been held completely in place.
Insert the key sheet correctly as shown above. Otherwise, the keypad of the programming console may not function
properly.
Correct Usage
7-3
Advertisement
Table of Contents
