How To Operate; Password Input Screen; Changing Operation Mode - Omron V670 Series User Manual

7-5-2 How to Operate

7-5-2-1 Password Input Screen

When the programming console is connected, the screen below appears. Press
played according to key switch setting.
If you enter the password when the key switch is set to the MONITOR mode, all the operations are aborted even if the controller works.
Please note that the screen is ready to accept the execution of operation in the MONITOR mode then.

7-5-2-2 Changing Operation Mode

The controller operation mode is switched by changing the key switch of the programming console.
• MONITOR Mode
Communication with a tag can be executed by using the programming console in the MONITOR mode. Any command cannot be
controlled from a host device.
• RUN Mode
The controller setting and execution status can be displayed in the RUN mode. Any other functions cannot be used.
• PROGRAM Mode
This mode is unavailable in this controller.
Set the key switch to RUN.
Set the key switch to
MONITOR.
Set the key switch to RUN.
Set the key switch to PROGRAM.
and then . An initial status of the mode is dis-
Set the key switch to PROGRAM.
7-5 Functions
7-7