Operation Overview - Omron V400-H111 User Manual

Operation Overview

Installation and Connections
Prepare the required components and connect them.
Main Peripheral Devices
• Cable
• Power supply device
• Contactor
Turn ON the power and press the trigger buttons to
read the code.
• Reading method
• Field of view setting
• Display details
Basically, no settings are required. However, in
the following cases, the settings may need to be
changed using the Setup window of the Code
Reader or the special tool [2DCR Configear].
• To
change
conditions (See note.)
• To use various functions
If [2DCR Configear] is used, the changes you
have made will be reflected to the Code Reader using the Memory Card or the
communication function of [2DCR Configear].
*1 The default settings are as follows: Baud rate: 9,600 bps; Parity: None;
Data length: 8 bits; Stop bits: 1 bit
Reading 2D Code
System Settings
the communication
Section 1
Product Overview
Section 2 p.17
Section 3 p.35
Section 4 p.43
V400-H111/211
User's Manual
15