Led Indicators - Omron V400-H111 User Manual

LED Indicators

Indicator
Power On the bottom of the
monitor
Memory Card Beside the Memory Card
slot
RS-232C Communications Output
Output for Successful Readings
Read data is output in the following format.
Output for Unsuccessful Readings
Nothing is output with the factory setting.
An error code output, however, can be set for unsuccessful readings.
* NG output setting
When the NG output is set to ON, the output contents can be changed.
Output contents when NG output is ON:
• The NG mark is displayed on the monitor in red.
• The data "?E000" is sent via RS-232C communications.
Location
Lit when power is turned ON, and remains lit during
operation
Lit while the Memory Card is being accessed. Do not
remove the Memory Card while this indicator is lit.
Section 3
Reading 2D Code
Details
V400-H111/211
User's Manual
41